SeaKnots

Preforming winterization of the water system, had the electric heater and hair dryer plugged in at the same time resulting in my 110 volt plugs becoming disabled.

Can anyone help me find the fuse to reset them?

Thanks!

Chris

B40 #197

Views: 103

Replies to This Discussion

It sounds like your AC breaker tripped.  Just incase you've overlooked the obvious.  Try to Close and then Open the main panel AC Outlets breaker.

Thanks for the suggestion.

I tried it immediately after the power went off, interestingly the power is coming to the microwave,, just not to outlets.

My B40 has 240v supply, however I am sure the circuit breakers are in the same location as your boat. Mine was built in France. 
The first MCB is located in the aft starboard locker, almost beneath your feet when standing at the wheel. The other is located down below in the locker over the main panel. Open the cabinet door and it’s on your right.
This might or might not be helpful. I’d send photos but I am about 600 miles from my boat, at present.

I'll be at the boat on Monday and look for them there.

Thanks!

RSS

Latest Activity

Accutek Packaging Machine updated their profile
Nov 10, 2025
Accutek Packaging updated their profile
Oct 21, 2025
Lucas updated their profile
Oct 9, 2025
Elowen updated their profile
Oct 9, 2025
Profile IconAssignment Mentor, Elowen, Hannah Morgan and 3 more joined SeaKnots
Oct 6, 2025
Cliyerlye posted photos
Aug 30, 2025
johnyosin updated their profile
Aug 29, 2025
Profile Iconpattem digital, Hagenman, johnyosin and 6 more joined SeaKnots
Aug 28, 2025
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2026   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service