SeaKnots

Crossing Biscay With A Following Sea And 20kt Wind, We heard Graunching Sounds From The Auto Pilot, And Saw That There Was some Movement Where It Was Supported On A Wooden Platfrom, Because It's,  Wooden Tightening The Bolts Squeezed The Wood, We Have Put In Two More Bolts But Are Still A Bit Nervous About Its Strength, Any one Any Thoughts Or Similar Experience

Views: 185

Replies to This Discussion

Where did you add the two new bolts? Perhaps your mounting was missing a few that should have been there?

Hi jeff
There are 4 in total , ! we added 2 more and tightened them all but are concerned at The Inherent Flexibility Of Wooden Mounts and Wondered If A Metal Reinforcing Plate Would Be a Useful Addition

How old is your B40?  Reason for my question is that Beneteau made a post-production modification in about 2008 when the steering gear was beefed-up.  If your yacht was built before about mid-2008, it would be worth checking that the modification was made to your yacht because if not, that might have been a contributory factor in the problem you experienced.

John

RSS

Latest Activity

Accutek Packaging Machine updated their profile
Monday
Accutek Packaging updated their profile
Oct 21
Lucas updated their profile
Oct 9
Elowen updated their profile
Oct 9
Profile IconElowen, Assignment Mentor, Romano Romano and 3 more joined SeaKnots
Oct 6
Cliyerlye posted photos
Aug 30
johnyosin updated their profile
Aug 29
Profile Iconpattem digital, johnyosin, Hagenman and 6 more joined SeaKnots
Aug 28
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service