SeaKnots

Thanks to my sailing friend an improved anchor system is in place. The old system had the main anchor angled off the bow about 30 degrees to starboard. The chain ran about 6 feet aft toward the main cross beam. A plastic milk carton stowed the chain forward of the starboard bow net. The theory was to keep the weight of the windlass and chain off the bow. However after months of sailing we found that comparable weight in the bow made a more efficient flow.

A chain and rode box was built inside the bow under the windlass. No more chain dragging across the deck. No more stuffing the tools into the bow for weight. Maybe tomorrow's picture will show the interior side. No doubt, the deck needs a paint job.

The second anchor is mounted to a wood support tied to the port bow net. It is ready to deploy manually. This is much more efficient than the old system which also required dragging the anchor and chain across the main hull from the cross beam.

P.S. I decided that today is Day 1 of the next chapter in my life. In addition to my daily journaling and sending a hand written letter of gratitude to someone who has touched my life, I am taking a picture a day. Send me an email or text if you want to be put on my gratitude list.

Sassythesailor@gmail.com
321 682 6288

Views: 78

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Latest Activity

Matt updated their profile
Sep 17
Robert & Sandy joined SeaKnots's group
Thumbnail

Beneteau Corner

The place for SeaKnots members with an interest in Beneteau
Aug 3
Robert & Sandy posted a discussion

SWITH FOR FORE AND AFT HEADS PUMPS

Our Oceanis 43 was recently serviced and since her return neither of the heads macerators are working. There must be a master switch located on board, trouble is I cannot locate it. Any assistance most welcome.BilgolabandsSee More
Jul 14
Michael Boyle replied to Robert & Sandy's discussion IS SEAKNOTS BENETEAU 40/43 ACTIVE. in the group Beneteau 40 & 43
"Still active and always useful "
Jun 11
Michael Boyle replied to Paul O' Kirwan's discussion Flooding due to Bilge pump Reverse Siphon in the group Beneteau 40 & 43
"Have a 2010 43 and whilst racing recently and well heeled over on port had similar experience. Only in the aft heads and haven’t as yet sorted out where the ingress came from but suspect the shower drain. Never happened before in 15 years with…"
Jun 11
Robert & Sandy added a discussion to the group Beneteau 40 & 43
Thumbnail

IS SEAKNOTS BENETEAU 40/43 ACTIVE.

I note there has been no activity on SeaKnots Beneteau 40/43 since early 2025.Is one of my favourite boating sites still alive and kicking?BilgolabandsSee More
Jun 10
Profile Iconfgdfgdf, phreich, reportotosite and 3 more joined SeaKnots
May 26
phreich liked S/V Compadre's group Cascade Owners Unite
Apr 28
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2026   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service