SeaKnots

Kato dinghy davits added to our Beneteau 43 October Moon.

Views: 121

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by Mike Brown on November 8, 2013 at 12:11am
The gas locker once you know what to remove first isn't too bad. The worst part is crawling into the cockpit locker and into the aft section under the propane tank. It helps to be a contortionist. The legs you see are to stabilize the stern railings. Between the outboard and davits they flex quite a bit. Not Beneteau's finest design. As for solar panels there are risers that install on top of the davit cross bars that will provide another 12" in height. Not sure when I'll do that as my name isn't Rockerfeller. If you know what I mean. Agh those off color covers:(. Yes mine have lost their paint too. I'm tempted to paint the a shade of grey that would match the boat trim. White would be nice but I suspect it'll be a bear trying to match color. It's on the list but way down there at the moment.
Comment by Gavin White on November 3, 2013 at 11:49pm

Hi Mike Thanks for that. Strengthening in behind the gas locker must have been a challenge.  Is there also a leg that goes all the way down to the bottom step or is that part of a crane or something for your outboard?  Solar is something I am considering too and in that regard I think the davits might be a bit low to allow for panels and easy access. Your thoughts?

On another matter I see the plastic covers of your vents and shore power inlets have gone yellow in the sun. Mine have too and they have been annoying me for some time, so this weekend I took them off and have given them to a painter to spray white.  Having mentioned it, I hope they don't start annoying you too now:)

Cheers

Gavin

Latest Activity

Matt updated their profile
Sep 17
Robert & Sandy joined SeaKnots's group
Thumbnail

Beneteau Corner

The place for SeaKnots members with an interest in Beneteau
Aug 3
Robert & Sandy posted a discussion

SWITH FOR FORE AND AFT HEADS PUMPS

Our Oceanis 43 was recently serviced and since her return neither of the heads macerators are working. There must be a master switch located on board, trouble is I cannot locate it. Any assistance most welcome.BilgolabandsSee More
Jul 14
Michael Boyle replied to Robert & Sandy's discussion IS SEAKNOTS BENETEAU 40/43 ACTIVE. in the group Beneteau 40 & 43
"Still active and always useful "
Jun 11
Michael Boyle replied to Paul O' Kirwan's discussion Flooding due to Bilge pump Reverse Siphon in the group Beneteau 40 & 43
"Have a 2010 43 and whilst racing recently and well heeled over on port had similar experience. Only in the aft heads and haven’t as yet sorted out where the ingress came from but suspect the shower drain. Never happened before in 15 years with…"
Jun 11
Robert & Sandy added a discussion to the group Beneteau 40 & 43
Thumbnail

IS SEAKNOTS BENETEAU 40/43 ACTIVE.

I note there has been no activity on SeaKnots Beneteau 40/43 since early 2025.Is one of my favourite boating sites still alive and kicking?BilgolabandsSee More
Jun 10
Profile Iconfgdfgdf, phreich, reportotosite and 3 more joined SeaKnots
May 26
phreich liked S/V Compadre's group Cascade Owners Unite
Apr 28
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2026   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service