SeaKnots

Crossing Biscay With A Following Sea And 20kt Wind, We heard Graunching Sounds From The Auto Pilot, And Saw That There Was some Movement Where It Was Supported On A Wooden Platfrom, Because It's,  Wooden Tightening The Bolts Squeezed The Wood, We Have Put In Two More Bolts But Are Still A Bit Nervous About Its Strength, Any one Any Thoughts Or Similar Experience

Views: 178

Replies to This Discussion

Where did you add the two new bolts? Perhaps your mounting was missing a few that should have been there?

Hi jeff
There are 4 in total , ! we added 2 more and tightened them all but are concerned at The Inherent Flexibility Of Wooden Mounts and Wondered If A Metal Reinforcing Plate Would Be a Useful Addition

How old is your B40?  Reason for my question is that Beneteau made a post-production modification in about 2008 when the steering gear was beefed-up.  If your yacht was built before about mid-2008, it would be worth checking that the modification was made to your yacht because if not, that might have been a contributory factor in the problem you experienced.

John

RSS

Latest Activity

Robert & Sandy left a comment for Michael Boyle
"Michael, From experience over three keel boats a fully battened main is almost a requirement. Not only will it make dropping the sail into the boom bag far easier it certainly reduces any flogging and vastly lengthens the life of the sail. While…"
May 16
Brandon P is now a member of SeaKnots
Apr 18
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Anna Kokou and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service