Tags:
I am running my heater regularly now that I am heading south off the Bahamas in my B-40. I do not notice the particles that you are mentioning. I would suggest two things to try to see if it fixes the problem. First, clean the two intake screens under the berth by the mast support. There are two screws on each frame and can come of easily or pull them out from inside the berth. Mine are filled with lint after one month of constant use. The second is to vacuum the entire area by the compressor.
Let us know if this improves the condition.
Mike
The heat/ac distribution ducting on our b43 has a black plastic exterior then, going internally, there is red or yellow insulation that covers a thin wire wound thin black plastic interior air tube. Maybe moisture developed at a low point and slowly ate through the interior plastic? Maybe its something in the distribution box or off the fan motor wrapping? Who knows, I'd just take the salon ducting/ distribution box out, shake it out, and try to figure out what the heck is going on. Might have been a critter in there (hope not)! I think that particular ducting is pretty easy to remove and replace.
Good Luck
James
Finally found the cause of the particles coming out the AC/Heat vents. Turned out to be a heavy accumulation of dust in the fan box. Vac'd it out, cleaned the filters and problem gone. Looks like the filter at the compressor isn't up to the task. More frequent cleaning of the filters and fan box are in order.
Mike
Switch to the Mobile Optimized View
© 2025 Created by CAN DRAC.
Powered by