"Terry Kennedy please call"
Adler Barbour Evaporator 6"x10"x11"
I need an Adler Barbour R12 evaporator box 6"x10"x11" to replace mine. I punctured it! The compressor (Danfoss Cold Machine) was working fine. It lost all pressure, so I will have to refill and pull a vacume. I have researched epoxy and/or brazing repair as an option, but have been told that doesn't work well. So, I am hoping to locate a used unit to reconnect to my compressor. Any possibilities and/or suggestions from any similar experiences would be appreciated.
- Attachments:
-
-
68427701813_0_SM.jpg, 2 KB -
22645701813_0_SM.jpg, 3 KB
-
Replies to This Discussion
-
Permalink Reply by Randy on
-
Here is a tip for everyone that did what I did with a knife as I punctured the evaporator on our Catalina 36 5 years ago and is still working today, The evap is very thin aluminum and will not take heat or silver solder cuz it will just melt the evap. What you can do is go to Grainger supply and get what is called RED EPOXY if they still carry it, it is made just for this, It is heat activated.
Here is a link to what I used and explains it more in detail.
http://www.highsidechem.com/redepxy.html
Randy Sherwood
- ‹ Previous
- 1
- 2
- Next ›
Latest Activity
"hay hope you are ok/ am friends with ana in fb fb kicked zeehag out for what hacker did to the accounts--- no recourse bubba duran handles all the business now. email works. x works mewe works.... fone works"
"Auto ascending setup is an interesting idea, though it takes a bit of fiddling around to get it right. Once it's dialed in, it actually works quite well."
"Michael,
From experience over three keel boats a fully battened main is almost a requirement.
Not only will it make dropping the sail into the boom bag far easier it certainly reduces any flogging and vastly lengthens the life of the sail. While…"
© 2025 Created by CAN DRAC.
Powered by
