SeaKnots

Kato dinghy davits added to our Beneteau 43 October Moon.

Views: 121

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by Mike Brown on November 8, 2013 at 12:11am
The gas locker once you know what to remove first isn't too bad. The worst part is crawling into the cockpit locker and into the aft section under the propane tank. It helps to be a contortionist. The legs you see are to stabilize the stern railings. Between the outboard and davits they flex quite a bit. Not Beneteau's finest design. As for solar panels there are risers that install on top of the davit cross bars that will provide another 12" in height. Not sure when I'll do that as my name isn't Rockerfeller. If you know what I mean. Agh those off color covers:(. Yes mine have lost their paint too. I'm tempted to paint the a shade of grey that would match the boat trim. White would be nice but I suspect it'll be a bear trying to match color. It's on the list but way down there at the moment.
Comment by Gavin White on November 3, 2013 at 11:49pm

Hi Mike Thanks for that. Strengthening in behind the gas locker must have been a challenge.  Is there also a leg that goes all the way down to the bottom step or is that part of a crane or something for your outboard?  Solar is something I am considering too and in that regard I think the davits might be a bit low to allow for panels and easy access. Your thoughts?

On another matter I see the plastic covers of your vents and shore power inlets have gone yellow in the sun. Mine have too and they have been annoying me for some time, so this weekend I took them off and have given them to a painter to spray white.  Having mentioned it, I hope they don't start annoying you too now:)

Cheers

Gavin

Latest Activity

Brandon P is now a member of SeaKnots
Apr 18
Pankaj Tripathi is now a member of SeaKnots
Mar 19
Anna Kokou updated their profile
Mar 8
Profile IconDo My Assignment, William Noah, Thinq Proto and 4 more joined SeaKnots
Mar 7
Michael Boyle commented on CAN DRAC's group Beneteau 40 & 43
"Hi All, french built 2010 43 has been very dry down below but now a slow leak has occurred which is showing at the limber holes under the floor board in forward cabin. Bilge pump goes every 3hrs for 20secs. Not sure if it’s fresh/rain water or…"
Feb 28
LOLA commented on Franc's video
Thumbnail

Do you dream about offshore cruising?

"hello been years since on site. im having trouble changing my heading. are we limited to words? is there an instruction page? Thank you lola"
Jan 23
Filling Machine updated their profile
Dec 27, 2024
Packaging Machinery updated their profile
Dec 24, 2024
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2025   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service