Saludo - SeaKnots2024-03-29T07:35:40Zhttps://seaknots.ning.com/forum/topics/saludo?commentId=900123%3AComment%3A199615&feed=yes&xn_auth=noHi John,
I installed a Pagur…tag:seaknots.ning.com,2013-01-27:900123:Comment:1994452013-01-27T22:45:23.219ZRafahttps://seaknots.ning.com/profile/Rafa
<p>Hi John,</p>
<p></p>
<p>I installed a Paguro 4000, as seen in the above photos, although mine is a 43' 3 cabin.</p>
<p></p>
<p>Let me know how can I be of help.</p>
<p></p>
<p>Saludos.</p>
<p>Hi John,</p>
<p></p>
<p>I installed a Paguro 4000, as seen in the above photos, although mine is a 43' 3 cabin.</p>
<p></p>
<p>Let me know how can I be of help.</p>
<p></p>
<p>Saludos.</p> Hi Patrick
I am in the proc…tag:seaknots.ning.com,2013-01-24:900123:Comment:1996152013-01-24T21:47:47.886Zjohn degnanhttps://seaknots.ning.com/profile/johndegnan
<p>Hi Patrick</p>
<p> </p>
<p>I am in the process of buying a 2011 Beneteau 43' 2 cabin and also need to install the generator but am limited by the opening of the starbaoard lazerette (14" x 30" ) and have only found the Paguro small enough to fit. I was wondering what you ended up doing and also had general questions about the 43'. Can you message me?</p>
<p> </p>
<p>Cheers</p>
<p>John</p>
<p>Hi Patrick</p>
<p> </p>
<p>I am in the process of buying a 2011 Beneteau 43' 2 cabin and also need to install the generator but am limited by the opening of the starbaoard lazerette (14" x 30" ) and have only found the Paguro small enough to fit. I was wondering what you ended up doing and also had general questions about the 43'. Can you message me?</p>
<p> </p>
<p>Cheers</p>
<p>John</p> Hi Patrick,
Yes, it is insta…tag:seaknots.ning.com,2012-12-08:900123:Comment:1978902012-12-08T02:37:21.491ZRafahttps://seaknots.ning.com/profile/Rafa
Hi Patrick,<br />
<br />
Yes, it is instaled in the starboard lazarette, and it's a Paguro 3000<br />
<br />
Saludos.
Hi Patrick,<br />
<br />
Yes, it is instaled in the starboard lazarette, and it's a Paguro 3000<br />
<br />
Saludos. Rafa,
I have a Beneteau 43 O…tag:seaknots.ning.com,2012-12-05:900123:Comment:1977902012-12-05T02:22:38.984ZPatrickhttps://seaknots.ning.com/profile/PatrickKierans
<p>Rafa,</p>
<p></p>
<p>I have a Beneteau 43 Oceanis 2011 and would like to install a generator. Can you tell me what kind you installed and where. In the starboard lazarette at the helm station I have one of my AC systems the other is in the saloon. Not sure if I have the room for a generator.</p>
<p> </p>
<p>Regards,</p>
<p> </p>
<p>Patrick</p>
<p>Rafa,</p>
<p></p>
<p>I have a Beneteau 43 Oceanis 2011 and would like to install a generator. Can you tell me what kind you installed and where. In the starboard lazarette at the helm station I have one of my AC systems the other is in the saloon. Not sure if I have the room for a generator.</p>
<p> </p>
<p>Regards,</p>
<p> </p>
<p>Patrick</p> Thank you Rafa! I was conside…tag:seaknots.ning.com,2012-11-06:900123:Comment:1973332012-11-06T05:23:41.486ZCAN DRAChttps://seaknots.ning.com/profile/CANDRAC
<p>Thank you Rafa! I was considering the location Foster used but I just checked and in my case it's taken by the inverter so I must consider a spot like yours. ps: Yes, we did cruise the Caribbean on our way to the Med in 2009. Now we are based in Barcelona, Spain. You can find our blog here: <a href="http://seaknots.ning.com/profiles/blog/list?user=DRACVERD" target="_blank">http://seaknots.ning.com/profiles/blog/list?user=DRACVERD</a></p>
<p>Thank you Rafa! I was considering the location Foster used but I just checked and in my case it's taken by the inverter so I must consider a spot like yours. ps: Yes, we did cruise the Caribbean on our way to the Med in 2009. Now we are based in Barcelona, Spain. You can find our blog here: <a href="http://seaknots.ning.com/profiles/blog/list?user=DRACVERD" target="_blank">http://seaknots.ning.com/profiles/blog/list?user=DRACVERD</a></p> Hi Can Drac,
As promised her…tag:seaknots.ning.com,2012-11-04:900123:Comment:1973192012-11-04T19:34:46.855ZRafahttps://seaknots.ning.com/profile/Rafa
<p>Hi Can Drac,</p>
<p></p>
<p>As promised here are some pictures of my own instalation:</p>
<p></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2472766481?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472766481?profile=RESIZE_1024x1024" width="721"></img></a></p>
<p>This is the waterlock I've changed by the NLP. An important noise improvement. Less dbs and les accute tone…</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/2472766878?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472766878?profile=RESIZE_1024x1024" width="721"></img></a></p>
<p></p>
<p></p>
<p>Hi Can Drac,</p>
<p></p>
<p>As promised here are some pictures of my own instalation:</p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2472766481?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472766481?profile=RESIZE_1024x1024" width="721"/></a></p>
<p>This is the waterlock I've changed by the NLP. An important noise improvement. Less dbs and les accute tone</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2472766878?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472766878?profile=RESIZE_1024x1024" width="721"/></a></p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2472767172?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472767172?profile=RESIZE_1024x1024" width="721"/></a></p>
<p></p>
<p>Saludos.</p> Thanks for the welcome Foster…tag:seaknots.ning.com,2012-09-01:900123:Comment:1931132012-09-01T11:54:04.889ZRafahttps://seaknots.ning.com/profile/Rafa
<p>Thanks for the welcome Foster/Can Drac!</p>
<p></p>
<p>FOSTER: I will think of sails and prop in a year or so. Whatever you learn in the meantime will be very useful<br></br><br></br><br></br>CAN DRAC: I installed a Paguro 3000 in the same place and the same way than David did (I'm using his photos as I'm not on mine). I installed a 16.000 btu a/c sytem in the place that is prepared for that (I'll post pictures when on the boat).<br></br><br></br>The Paguro 3000 by its shelf is not able to start the a/c due to…</p>
<p>Thanks for the welcome Foster/Can Drac!</p>
<p></p>
<p>FOSTER: I will think of sails and prop in a year or so. Whatever you learn in the meantime will be very useful<br/><br/><br/>CAN DRAC: I installed a Paguro 3000 in the same place and the same way than David did (I'm using his photos as I'm not on mine). I installed a 16.000 btu a/c sytem in the place that is prepared for that (I'll post pictures when on the boat).<br/><br/>The Paguro 3000 by its shelf is not able to start the a/c due to the starting current peak, but as I installed as well the victron charger-inverter and the multicontrol that can limit the charging current, the system works.<br/><br/>When you start the A/c the Paguro switches-off the current suply because of the current load, to protect the system. What happens then is that the ac compressor starts using the current supplied by the batteries, and in a matter of seconds Paguro's current supply restarts and feeds the a/c.<br/><br/> I feel my system is noisy (a/c and paguro vibration + exhaust noise) and I'm now in the process of reducing noises, step by step. Fisrt I want to reduce the exhaust noise.<br/><br/>Fist thing I'll try is replacing the simple waterlock the system has by a waterlock muffler, Vetus NLP or the new NLP3. And then deciding if it is better and splitter or more mufflers.<br/><br/><br/><br/>PD: not sure where you are sailing right now, I think some time ago a saw pictures of your boat in the Caribean waters</p>
<p></p>
<p>Saludos.</p>
<p></p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2472763627?profile=original"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472763627?profile=original" width="721"/></a></p>
<p></p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2472763853?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472763853?profile=RESIZE_1024x1024" width="721"/></a></p>
<p></p>
<p></p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/2472772391?profile=original"><img width="721" class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/2472772391?profile=RESIZE_1024x1024" width="721"/></a></p> Welcome Rafa! We are thinking…tag:seaknots.ning.com,2012-09-01:900123:Comment:1927822012-09-01T06:58:19.815ZCAN DRAChttps://seaknots.ning.com/profile/CANDRAC
<p>Welcome Rafa! We are thinking about adding a generator to our B43 mainly to be able to run air conditioning at anchor (two babies on board). Wondering what brand/model you used and where you placed it. saludos!</p>
<p>Welcome Rafa! We are thinking about adding a generator to our B43 mainly to be able to run air conditioning at anchor (two babies on board). Wondering what brand/model you used and where you placed it. saludos!</p> Hello,
Welcome to the group.…tag:seaknots.ning.com,2012-08-31:900123:Comment:1931042012-08-31T10:36:00.755Zfosterhttps://seaknots.ning.com/profile/foster31
<p>Hello,</p>
<p><br/>Welcome to the group.</p>
<p></p>
<p>I have an 0ceanis 43 from 2007 with most of the modifications you have also done.</p>
<p>For the moment all is working well. i am concentrating on improving the sails and investigating the pros and cons of a feathering prop with variable pitch.</p>
<p></p>
<p>Saludos.</p>
<p></p>
<p>Denis</p>
<p>Hello,</p>
<p><br/>Welcome to the group.</p>
<p></p>
<p>I have an 0ceanis 43 from 2007 with most of the modifications you have also done.</p>
<p>For the moment all is working well. i am concentrating on improving the sails and investigating the pros and cons of a feathering prop with variable pitch.</p>
<p></p>
<p>Saludos.</p>
<p></p>
<p>Denis</p>