SeaKnots

Good day everyone,

I have Hull #39 OC43, looking for any wisdom from the group.

The black paint trim on the salon and deck windows rubs off and runs on the deck which means cleaning the deck almost impossible.  Has anyone had any experience with this and any solution.

Thanks for your help,

John

Views: 57

Reply to This

Replies to This Discussion

I think the key word here is that it is paint.  I let mine go to long and the paint is very thin in some places.  I accidentally got wax on the glass when polishing the fiberglass and noticed weeks later that it looked much better than the non-waxed area.  I cleaned the black paint with a very fine polishing compound and used cleaner wax for the first coat.  rewaxed with pure carnauba wax since.  Been a couple of months and no more black runoff in the rain.  Looks much better.

A charter skipper in Clear Lake TX pulled the Lewmar hatches out of a clients B40 port lights, stripped the black paint, and repainted with Mercury black spray paint.  They looked very good.  Mine will need that when we get back to the states.

RSS

Latest Activity

tejbir singh lamba is now a member of SeaKnots
Jun 3
kevin rodriquez updated their profile
May 29
kevin rodriquez is now a member of SeaKnots
May 29
Zara Mae Pickering updated their profile
May 26
Profile IconZara Mae Pickering and dario hill joined SeaKnots
May 26
Online Geeks posted a discussion

What is the Best Stylish Name for Facebook?

We all know that finding a Stylish Name for Facebook is a little bit difficult. We have some stylish fb names for you which you can consider to change with the old one. Here are stylish fb names for you. Soul HackerPanda GirlStar BoySweet ZeharSuper GirlSee More
May 22
Online Geeks replied to Jaccy Mice's discussion Hire A High-Quality Data Analysis Assignment Help Services in USA
May 19
Larry Witty replied to Dave Shore's discussion B43 Traveller in the group Beneteau 40 & 43
"I had to replace my sheeve on both sides and really struggled to get the bolts out. Once I had them out, each was bent thus the challenge. I ended up stripping one or two of the hex bolts and used an angle grinder to square off the head of the bolt…"
May 17
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2023   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service