SeaKnots

Having drug the stock anchor this past weekend in a thunderstorm blow I'm wanting to upgrade my ground tackle to a 55lb Rocna anchor and more chain. 

Can anyone tell me if I can safely add chain to my existing chain and still use the windlass?

Regards,

Wayne

B40

Views: 424

Replies to This Discussion

on third year cruising the Bahamas.  Upgraded to 55 pound rocna with 225 ft of chain and 125 ft of braided rope.  our original plans were to get the the BVIs and thought we might be anchoring in 35 to 40 ft of water.  Not sure I want to put our boat thru the wave action to get there.  We like the Bahamas.  I went with 5/16" HT chain and had to change the windlass.  Found one on eBay new for 1/3 of the dealer price.  Our original ~30ft of 3/8" chain and 150 ft of 3 strand is coiled into a bucket in the aft laz.  Chain on top.  I have a medium size Fortress suspended from the stern pulpit using a slide bracket with the adapter for the fortress palm.  I can get shakle attached to anchor and deployed in about a minute.  Have had to twice in 6 years of ownership of MiJoy.

There are times when the anchorage has a few inches of sand over rock and the anchor is not really set.  If plenty of sand, the rocna buries up to the ring.  Held in well over 50 knots of wind at Big Majors one night.

Mike

S/V MiJoy

Not sure of you've done anything yet as this post appears to be from July 2017. If you're still interested yes there are links that are used to connect two different lengths of chain. West Marine and others sell them. After connecting the two halves through the chain links you peen pins to ensure it stays together. The down side is their breaking strengths which are usually much less than chain. It becomes your weak link in your ground tackle. Not a problem in normal conditions but when the wind picks up you'll be wondering if it'll hold. Not a good feeling. Do a web search on them and decide for yourself.

Mike

RSS

Latest Activity

Matt updated their profile
Sep 17
Robert & Sandy joined SeaKnots's group
Thumbnail

Beneteau Corner

The place for SeaKnots members with an interest in Beneteau
Aug 3
Robert & Sandy posted a discussion

SWITH FOR FORE AND AFT HEADS PUMPS

Our Oceanis 43 was recently serviced and since her return neither of the heads macerators are working. There must be a master switch located on board, trouble is I cannot locate it. Any assistance most welcome.BilgolabandsSee More
Jul 14
Michael Boyle replied to Robert & Sandy's discussion IS SEAKNOTS BENETEAU 40/43 ACTIVE. in the group Beneteau 40 & 43
"Still active and always useful "
Jun 11
Michael Boyle replied to Paul O' Kirwan's discussion Flooding due to Bilge pump Reverse Siphon in the group Beneteau 40 & 43
"Have a 2010 43 and whilst racing recently and well heeled over on port had similar experience. Only in the aft heads and haven’t as yet sorted out where the ingress came from but suspect the shower drain. Never happened before in 15 years with…"
Jun 11
Robert & Sandy added a discussion to the group Beneteau 40 & 43
Thumbnail

IS SEAKNOTS BENETEAU 40/43 ACTIVE.

I note there has been no activity on SeaKnots Beneteau 40/43 since early 2025.Is one of my favourite boating sites still alive and kicking?BilgolabandsSee More
Jun 10
Profile Iconfgdfgdf, phreich, reportotosite and 3 more joined SeaKnots
May 26
phreich liked S/V Compadre's group Cascade Owners Unite
Apr 28
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2026   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service