Part owner of a MacGregor 222. Also regularly sail a Coronado 25.
Current location:
Troy, Ohio
Looking to:
I'm a retired electrical engineer (retired early to enjoy life), handy with all things mechanical and electrical. I love to meet new people and experience new places, and would enjoy crewing on a happy sailboat anywhere it's warm.
Comment Wall (4 comments)
You need to be a member of SeaKnots to add comments!
About the swing keel. We have the same problem up here. Need to get keel up to get on the trailer. My only thought would be to put her on the beach, bow first, and try to use the main halyard to tip her on side far enough to make temporary reattachment of cable. Usually carry some small line that might work as temp cable and a cable clamp or 2. You wouldn't need a very long piece of cable to secure the keel in an up position. Like you I've wondered too. Thought about replacing cable and bolt it swings on but haven't figured out how yet. Would probably need to suspend in a sling. Now if the backhoe is strong enough............
Tom,
I have a 222 MacGregor Venture also. Enjoy sailing on our reservoir here in Oregon. Lost Creek lake. Great little boat. I retired at 62 and am enjoying it. A little hard to find crew. Seems like every body is still working:-)
i'm retired too and always looking for crew I'm 71 and love to have crew with me on any cruise down here in florida If yo uwant to come down from all that snow and join me sailing let me know i'd love to have you come down Bill the sailor
Hey! Great to hear that the course was so good. I am thinking of taking one of the courses after this one as a "holiday" in Florida and thanks to your info I now have a bit of an idea of where it will be. Happy Sailing!
We all know that finding a Stylish Name for Facebook is a little bit difficult. We have some stylish fb names for you which you can consider to change with the old one. Here are stylish fb names for you. Soul HackerPanda GirlStar BoySweet ZeharSuper GirlSee More
"I had to replace my sheeve on both sides and really struggled to get the bolts out. Once I had them out, each was bent thus the challenge. I ended up stripping one or two of the hex bolts and used an angle grinder to square off the head of the bolt…"
The starboard side of my Traveller is starting to lift up. I am guessing to remove the center 5mm Allen bolt that goes through the middle of the sheeves, although I cannot get it to budge, to access it. Does anyone have any experience with this??Thanks Dave B43 Shore's AdriftSee More
Comment Wall (4 comments)
You need to be a member of SeaKnots to add comments!
Join SeaKnots
I have a 222 MacGregor Venture also. Enjoy sailing on our reservoir here in Oregon. Lost Creek lake. Great little boat. I retired at 62 and am enjoying it. A little hard to find crew. Seems like every body is still working:-)
Barry