U.S. Coast Guard: Captain's License # 664545 (First Aid & CPR training)
Sailing Officer/Instructor, Mobjack sailboats, York River, VA - US NAVY
38' Diesel Cruiser, CA 1888 AL, San Francisco Bay/Sacramento Delta
32' Grand Banks Diesel Trawler, Doc # 694742, Chesapeake Bay/NC Coast
27' Albin Diesel Cruiser, AUL27290G586, Wrightsville Beach, NC
36' Cascade Sailboat, Savannah, GA/Florida East Coast
Outboard power boats & small sailboats, South Pacific
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:( email@example.com ) for the full details.
The new ELECTROMAAX Voyager 160A is advertised as a small case high output continuous model thanks to square wires and hairpin bending. It should fit where the OEM Hitachi 80A was.
We are strugling with the mechanical installation for…"
"Denis I can see your problem with the excessive gap in the belt. I also see you have the new style upper mount and adjuster. I have the old style mount and adjuster and had the opposite problem. My belt was too small and I couldn't fit it over…"
I have a gopro and just started using it at the end of last season. Its a great cam to use for sailing and other adventure sports. what makes it great is all the mountings you can buy or make for it. Last september we attached it to the end…"
"Hi Scott and Mike,
I ordered the kit from Electromaax with a new Voyager 165 A" hairpin" alternator. the installation is not that straight forward.
John Stevens is helping us sorting out the problems we encounter. He suggests we put…"
"Thomas: Maybe you've already done this project.
Here's how I handled the same issue on my ol' 36, Koru.
Grind the surfaces, with 36 grit, about 4 inches back from the center of the joint. (angle grinder is quick, but messy).
"John, l received an email about a GoPro versus water proof cameras but it looks like the 40/43 site still wont share comments properly so here goes.
I have a GoPro3 that I'm still getting used to. My daughter who was just here for a week has a…"