SeaKnots

Reefing Time!

Views: 38

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Latest Activity

James Taylor replied to Chris's discussion Battery Charger in the group Beneteau 40 & 43
"All great advice! Did you check the charger's "battery type" selector switch position (flood,gel,agm)? Our Dekka agm's ( 396ah house and 98ah engine) gave us over 7 1/2 years of usage before replacement. The batteries were still…"
1 hour ago
Mike Brown replied to sam's discussion Teak seat metal protrusions in the group Beneteau 40 & 43
"Sam, I have not seen anything like that on my or others 40/43s. I don't understand why they would even do such a thing considering there's no other material they could drive a brad into. Grinding the tops off flush sounds like the right…"
2 hours ago
Mike Brown replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Peter, I've also lost the scupper covers. I installed rubber pipe insulation over each side of the bridle and it works well in keeping the bridle from rubbing on the covers. . They'll need to be replaced periodically as they'll get…"
2 hours ago
Arne Opperud replied to sam's discussion Teak seat metal protrusions in the group Beneteau 40 & 43
"I have used Boracol treatment once or twice a year. Keeps the black spots away, maintaining a grey patina.      "
7 hours ago
Arne Opperud replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43
"I have used mid tan shoe polish, cream type. Worked well."
7 hours ago
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Yep, I too have snapped a couple of the clam shell drain covers off. I have a couple of spares, but may or may not replace this time. The slack didn't seem to be the ultimate cause. Seems that wind/tide shifts and wake surge would cause the…"
9 hours ago
Peter Obetz replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Sam, we are the essentially the same.  Using the same mantus bridle as you.  Quick question to you and any others using a bridle.  We had the bridle rubbing the sides of the bow in a recent storm and it ended up snapping off the…"
10 hours ago
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"On Longhawk we use a Rocna 20KG. I changed out the chain gypsy when new to one that handles 5/16 high Test chain. Then I went with 175 ft of 5/16 HT chain tailed with 200 ft of three strand.(overkill, but I had the rode as supplied new). For a short…"
11 hours ago
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2017   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service