SeaKnots

Prosser Hot Air Balloon 448 small

Views: 262

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by Nia on April 6, 2012 at 7:16am

Thanks Steve.  That was at Prosser, Washington on the Yakima River.  The balloonists like to dip their toes in the water.

Comment by Steve Knight on April 5, 2012 at 8:29pm

Great photo, Nia, where was this?  Everyone get airborne okay again?

Comment by Nia on March 30, 2012 at 12:23am

Sure Lola.  Send me a pic when you are done. :)

Comment by LOLA on March 29, 2012 at 10:46am

Can I paint this?

Latest Activity

Arne Opperud replied to sam's discussion Teak seat metal protrusions in the group Beneteau 40 & 43
"I have used Boracol treatment once or twice a year. Keeps the black spots away, maintaining a grey patina.      "
1 hour ago
Arne Opperud replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43
"I have used mid tan shoe polish, cream type. Worked well."
1 hour ago
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Yep, I too have snapped a couple of the clam shell drain covers off. I have a couple of spares, but may or may not replace this time. The slack didn't seem to be the ultimate cause. Seems that wind/tide shifts and wake surge would cause the…"
3 hours ago
Peter Obetz replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"Sam, we are the essentially the same.  Using the same mantus bridle as you.  Quick question to you and any others using a bridle.  We had the bridle rubbing the sides of the bow in a recent storm and it ended up snapping off the…"
5 hours ago
sam replied to Wayne's discussion Anchor upgrade in the group Beneteau 40 & 43
"On Longhawk we use a Rocna 20KG. I changed out the chain gypsy when new to one that handles 5/16 high Test chain. Then I went with 175 ft of 5/16 HT chain tailed with 200 ft of three strand.(overkill, but I had the rode as supplied new). For a short…"
5 hours ago
sam replied to Dave Shore's discussion B43 wheel leather in the group Beneteau 40 & 43
"My wheel leather is shot. Not only do I have spots of eroded / worn areas but the stitching is now going also. Instead of trying to salvage the Cordavan/ Buckskin or whatever color they call it, I plan on stitching up some new elk leather grey…"
5 hours ago
sam replied to Chris's discussion Battery Charger in the group Beneteau 40 & 43
"Chis, I have a 2008 B43 with what I expect is the same charger. Its a Xantrex 40 Amp. It does "run" a lot. As Mike responded. the fan is often on. Mine has done this  since essentially day one, cycling often.I have 660 amp hours of…"
5 hours ago
sam added a discussion to the group Beneteau 40 & 43
Thumbnail

Teak seat metal protrusions

All knowing list....I have a new question.My boat is 9 years old now, and the teak seats are beginning to have metal "brads" sticking up out of the teak. My teak has weathered, as I am of the  natural teak camp, not varnishing or oiling heavily. Has anyone else seen this? Did Beneteau use brads of some sort along with the mastic? I plan on taking a small grinding bit on my dremel tool and touching each one until they are no longer standing proud, then do a little light sanding. Thoughts and…See More
5 hours ago
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2017   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service