SeaKnots

Off Detroit

Views: 23

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Comment by Bruce on March 21, 2012 at 7:39am

Of course you can Lola!! 

Comment by LOLA on March 21, 2012 at 6:53am

GEAUTIFUL..may I paint this?

Latest Activity

Profile Iconsail abroad and Martin Aither joined SeaKnots
yesterday
James Sullivan is now a member of SeaKnots
Wednesday
Mike Brown replied to foster's discussion Serpentine pulley upgrade in the group Beneteau 40 & 43
"Denis good luck and let us know how you made out. Mike"
Apr 17
foster replied to foster's discussion Serpentine pulley upgrade in the group Beneteau 40 & 43
"Hello Mike, The new ELECTROMAAX Voyager 160A is advertised as a small case high output continuous model thanks to square wires and hairpin bending. It should fit where the OEM Hitachi 80A was. We are strugling with the mechanical installation for…"
Apr 16
Mike Brown replied to foster's discussion Serpentine pulley upgrade in the group Beneteau 40 & 43
"Denis I can see your problem with the excessive gap in the belt. I also see you have the new style upper mount and adjuster. I have the old style mount and adjuster and had the opposite problem. My belt was too small and I couldn't fit it over…"
Apr 14
Michael Cioffi left a comment for John Hanrahan
"Hi John I have a gopro and just started using it at the end of last season. Its a great cam to use for sailing and other adventure sports. what makes it great is all the mountings you can buy or make for it. Last september we attached it to the end…"
Apr 14
foster replied to foster's discussion Serpentine pulley upgrade in the group Beneteau 40 & 43
"Hi Scott and Mike, I ordered the kit from Electromaax with a new Voyager 165 A" hairpin" alternator. the installation is not that straight forward. John Stevens is helping us sorting out the problems we encounter. He suggests we put…"
Apr 14
john simpson commented on S/V Compadre's group Cascade Owners Unite
"Thomas: Maybe you've already done this project. Here's how I handled the same issue on my ol' 36, Koru.  Grind the surfaces, with 36 grit, about 4 inches back from the center of the joint. (angle grinder is quick, but messy). Cut…"
Apr 13
ADVERTISE ON SEAKNOTS CONTACT US AT: SeaKnots@SeaKnots.com

© 2015   Created by CAN DRAC.

Badges  |  Report an Issue  |  Terms of Service