SeaKnots

Comment

You need to be a member of SeaKnots to add comments!

Join SeaKnots

Latest Activity

Cam Whitlock joined CAN DRAC's group
Thumbnail

Beneteau 40 & 43

A place to exchange thoughts, ideas and discussions about the Beneteau/Oceanis 40 and 43 models.
Feb 14
Cam Whitlock is now a member of SeaKnots
Feb 13
Duane Darling is now a member of SeaKnots
Feb 7
Wayne replied to Wayne's discussion B40 Holding Tank Plumbing
"Well Bob as luck would have it, my boat does not have the optional macerator pump for holding tank pump out. There is a black switch under the sink but it is for the shower sump drain. Thanks again for the reply."
Feb 6
James Taylor replied to GaryG's discussion Anchor upgrade in the group Beneteau 40 & 43
"Forgot to mention we have 150ft of rode attached to 100ft of 3/8ht chain for total of 250 ft ground tackle."
Jan 30
James Taylor replied to GaryG's discussion Anchor upgrade in the group Beneteau 40 & 43
"We use original 44 pound plow that came with boat. Added 100ft 3/8 ht chain in 2010. This setup has proven very reliable and we have not drug since 2010. This set up has held in numerous weather systems with high winds from Martha's Vinyard Ma…"
Jan 24
Mike Brown replied to GaryG's discussion Anchor upgrade in the group Beneteau 40 & 43
"We have a 55lb Rocna on our 43 and it fits just fine, sets quickly 99% of the time and holds like a rock. I use a double line bridle made up of 5/8" 3 strand and a chain gripper plate. On those times where it doesn't set immediately I just…"
Jan 23
Bruce Bogdanoff replied to GaryG's discussion Anchor upgrade in the group Beneteau 40 & 43
"We upgraded from a Bruce 40lb anchor to a Manson 60 lb anchor on our B-40 as well as went all chain instead of rope to chain rode. The anchor fit perfectly on the roller. One suggestion is to put an inline swivel on the anchor and have a boat hook…"
Jan 23
ADVERTISE ON SEAKNOTS CONTACT US AT: 
candrac@sailforwater.com

© 2017   Created by CAN DRAC.   Powered by

Badges  |  Report an Issue  |  Terms of Service