SeaKnots2024-03-29T05:38:17ZEdward Harthttp://seaknots.ning.com/profile/EdwardHarthttp://storage.ning.com/topology/rest/1.0/file/get/2518400375?profile=original&width=48&height=48&crop=1%3A1http://seaknots.ning.com/group/cascadeownersunite/forum/topic/listForContributor?user=0f0vctb3x7aqf&feed=yes&xn_auth=noKeel epoxy coating flaking offtag:seaknots.ning.com,2020-03-14:900123:Topic:2365002020-03-14T20:03:40.177ZEdward Harthttp://seaknots.ning.com/profile/EdwardHart
<p>Five years ago, I had the bottom and keel ground off, the bottom checked for blisters (there were none) and both the keel and bottom epoxy coated. It was sand blasted and ospho prepared.</p>
<p>Two years ago, I hauled and painted the bottom, everything looked good then. </p>
<p>This past year I had the boat hauled and stored in SE Alaska. Just this past week, the person who is looking after it noticed that big pieces of the epoxy was flaking off the keel. No, I didn't run aground, it's much…</p>
<p>Five years ago, I had the bottom and keel ground off, the bottom checked for blisters (there were none) and both the keel and bottom epoxy coated. It was sand blasted and ospho prepared.</p>
<p>Two years ago, I hauled and painted the bottom, everything looked good then. </p>
<p>This past year I had the boat hauled and stored in SE Alaska. Just this past week, the person who is looking after it noticed that big pieces of the epoxy was flaking off the keel. No, I didn't run aground, it's much too far above the lower edge to have been caused by that.</p>
<p>Anyone had similar? If so, what's the best way to fix it?</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/4107023730?profile=original" target="_blank" rel="noopener">keel%20coating%20flaking%20off.jpeg</a></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/4107023730?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/4107023730?profile=RESIZE_710x" class="align-left"/></a></p> 29 Cascade Ownerstag:seaknots.ning.com,2018-07-21:900123:Topic:2316912018-07-21T04:07:57.950ZEdward Harthttp://seaknots.ning.com/profile/EdwardHart
<p>Can anyone tell me my clearance in feet I have to go under a bridge to get into my new marina. Help please</p>
<p>Can anyone tell me my clearance in feet I have to go under a bridge to get into my new marina. Help please</p> 1972 Cascade 36'tag:seaknots.ning.com,2015-10-19:900123:Topic:2183082015-10-19T14:16:37.809ZEdward Harthttp://seaknots.ning.com/profile/EdwardHart
<p>Hi everyone, glad to find a group of Cascade owners.</p>
<p>I recently purchased my 36' about three months ago and </p>
<p>need to find a set of replacement spreaders for her and </p>
<p>was looking for any recommendation on which company to</p>
<p>go with if anyone here has replaced there spreaders or has any</p>
<p>information about them that could help me.</p>
<p></p>
<p>Again thanks in advance for any help </p>
<p>Hi everyone, glad to find a group of Cascade owners.</p>
<p>I recently purchased my 36' about three months ago and </p>
<p>need to find a set of replacement spreaders for her and </p>
<p>was looking for any recommendation on which company to</p>
<p>go with if anyone here has replaced there spreaders or has any</p>
<p>information about them that could help me.</p>
<p></p>
<p>Again thanks in advance for any help </p> Stanchion holderstag:seaknots.ning.com,2015-07-02:900123:Topic:2169582015-07-02T05:40:32.412ZEdward Harthttp://seaknots.ning.com/profile/EdwardHart
<p>Anyone have a lead on finding some stanchion mounts, that fit the cascade custom toe rails. They were custom designed, the last I heard, a group put together for an order of Fifty or so. Might want to do that again???? Jack.</p>
<p></p>
<p></p>
<p></p>
<p></p>
<p></p>
<p></p>
<p>Anyone have a lead on finding some stanchion mounts, that fit the cascade custom toe rails. They were custom designed, the last I heard, a group put together for an order of Fifty or so. Might want to do that again???? Jack.</p>
<p></p>
<p></p>
<p></p>
<p></p>
<p></p>
<p></p> Hi rob.. I'm out here..tag:seaknots.ning.com,2012-12-01:900123:Topic:1977322012-12-01T00:53:26.033ZEdward Harthttp://seaknots.ning.com/profile/EdwardHart
<p> How does one "coment" ? Could'nt figure it out...</p>
<p> How does one "coment" ? Could'nt figure it out...</p>