I am looking for a plumbing schematic for the fresh water system on a BEN OC 43 2-cabin version.
The issue I am having is with water pressure to the galley sink. There is good pressure (hot and cold) to forward and aft heads and the cockpit shower, but galley sink is weak.
I am thinking the following:
- air in the line (proved this isn't the issue)
- line routing and distance
- clog in delta-facet or facet fittings, etc.
- distribution manifold
Thoughts and recommendations are welcome, but I want to start with a diagram if anyone has one?
I had a similar experience and after removing the faucet screen and removing a lot of calcium chips the low flow still remained. I found the blockage was in the smaller stainless braided lines that go from the semi rigid plumbing up into the faucet. Once I removed the faucet and unscrewed the braided lines that feed it, I used a small gauge stainless wire to remove the buildup. It is now a once a year or so project. Hope this helps
Thank you, Peter.
I will definitely try your suggestion. I had checked/cleaned the faucet screen (with no change), but I'd never considered the braided supply lines.
I'll try your suggestion and publish the results.
Peters reply is spot on!
We had same issue with our B43 water pressure in galley sink, resolution was exact same as Peters!